The Plastics workshop has the following equipment:
1. Injector ENGEL ES 1300/250 of “Engel Vertriebs” - Austria.
Technical data:
Maximum volume of injected detail - 617 cubic centimetre.
Maximum weight of injected detail* - 500 gr.
*The value is referring to polystyrene; averaged indices of processing.
Nozzle running - 350 mm
Path of opening - 860 mm
Height of the tool max - 800 mm; min - 200 mm
Bearer plates: overall dimensions - 910 mm x 910 mm
spacing between columns: horizontal - 635 mm
vertical - 635 mm
The machine is controlled by a microcomputer with original software of the company producer that enables easier control, maximum accuracy of the set parameters of the operating cycle and continuous process.
2. Injectors ENGEL ES 330 / 80 of “Engel Vertriebs” - Austria - three machines.
Technical data:
Maximum volume of injected detail - 113 cubic centimetre.
Maximum weight of injected detail* - 80 gr.
*The value is referring to polystyrene; averaged indices of processing.
Nozzle running - 250 mm
Path of opening - 500 mm
Height of the tool - max - 460 mm; min - 200 mm
Bearer plates: overall dimensions - 580 mm x 580 mm
spacing between columns: horizontal - 410 mm
vertical - 340 mm
Maximum weight of the tool - 1 ton.
The machine is controlled by a microcomputer with original software of the company producer that enables easier control, maximum accuracy of the set parameters of the operating cycle and continuous process.
All machines are equipped with special devices:
1. Converter S 25 Piovan Italy - 11.5 kg volume, hot air up to 90°C, dust filter, metal parts collector and pneumatic transport – it is used for charging and drying the materials.
2 A device in help of the injection GWK-TW60. 06 / GWKmbH - Austria for tempering the tool with temperature range: 20°C-90°C.
The Plastics workshop has two dryers for preliminary drying of granules and a machine for plastic scrap crushing.
